Smart Battery Charging and Swapping Cabinet

Smart Battery Charging & Swapping Cabinets for Electric Mobility Fleets

CYBEST manufactures commercial battery charging and swapping cabinets for electric motorcycles, e-bikes, and cargo tricycles. Our system integrates multi-compartment hardware, controlled charging channels, and IoT connectivity to maximize vehicle uptime for commercial delivery and shared mobility fleets.

Designed for seamless deployment, CYBEST cabinets support flexible hardware and software customization to match your specific battery dimensions, voltage architecture, and BMS communication protocols.

Add to Inquiry

Electric Vehicle 10-compartment Intelligent Battery Swapping Cabinet

CYBEST's 10-bay intelligent power exchange cabinet is a product for intelligent power exchange of two-wheel electric vehicle batteries in urban logistics distribution industry. The power exchange

Add to Inquiry

Software As A Service System

Provide integrated solutions for car rental and power rental, help operators, channels and stores to conduct integrated digital management of rental and sales, and risk control management of the

Add to Inquiry

Electric Motorcycle 4+2 Fast Charging Cabinet

CYBEST's electric motorcycle 4+2 fast charging cabinet is designed for improving the operation and maintenance efficiency of two-wheel electric vehicle stores and providing two modes of power

Add to Inquiry

Electric Vehicle 20-Compartment Intelligent Battery Swapping Cabinet

CYBEST's 20-bay shared intelligent charging and exchanging cabinet is a product aimed at improving the operation and maintenance efficiency and safe charging for the operator of shared electric bike.

Add to Inquiry

Electric Vehicle 5-compartment Intelligent Battery Swapping Cabinet

NFC/card swiping/code scanning/short number and other interactive forms are built in the battery to ensure that the user can change the power anytime and anywhere

Product Categories

Technical Specifications

Specification / Series	Compact Series (4-6 Slots)	Standard Fleet Series (8-12 Slots)	High-Throughput Fast-Charge Series
Target Application	Micro-mobility, local service hubs, small fleets	Express delivery hubs, regional logistics points	High-density commercial swapping stations
Input Voltage	110V / 220V AC (Single Phase)	220V / 380V AC (Three Phase)	380V / 480V AC (Three Phase Heavy Industrial)
Cooling & Thermal Safety	Temperature-controlled forced air	Smart air cooling + Compartment thermal isolation	High-CFM industrial cooling + Active thermal runaway isolation
Fire Suppression	Over-temp sensor shutoff	Integrated aerosol fire extinguisher per slot	Multi-stage aerosol / gas fire suppression system
Network Protocol	4G / Wi-Fi / Ethernet	4G / CAN / RS485 / MQTT API	4G / Industrial Ethernet / Open API / Cloud SaaS
Customization Scope	Branding, color, socket interface	Structural sizing, charging profile, protocol decoding	Full OEM/ODM hardware, electrical, and SaaS integration

Battery Adaptation & System Integration

Hardware Integration

Mechanical Lock & Insertion: Custom compartment tracks, guide rails, and lock mechanisms built for your battery casing dimensions.

Charging Connectors: Direct support for blind-mate copper pins, heavy-duty pogo pins, or customized quick-connect terminal blocks.

Voltage & Power Matching: Supported range from 48V to 72V+ nominal systems with adjustable charging current per channel.

Software & BMS Protocol Decoding

Communication Interface: Native support for RS485 and CAN Bus communication to read battery State of Charge (SOC), State of Health (SOH), and internal cell temperatures.

Cloud & App Connectivity: Cabinets transmit telemetry data via 4G/MQTT to your proprietary Fleet Management Software or white-label mobile app.

User Authentication: Access options include QR code scanning, RFID card, NFC, or remote cloud unlock.

Safety Engineering & Compliance

Commercial battery swapping environments require active protection against electrical overload and thermal runaway.

Thermal Runaway Protection

Individual battery compartments feature isolated structural barriers and optional aerosol-based fire suppression modules to contain thermal events.

Electrical Protections

Overcurrent, overvoltage, undervoltage, short-circuit, ground-leakage, and lightning surge protection on every charging channel.

Weatherproofing

Heavy-gauge galvanized steel cabinet bodies with outdoor anti-corrosion powder coating, designed for continuous outdoor use under IP55/IP65 standards.

OEM / ODM Project Engineering Workflow

Technical Requirement Evaluation

Share your battery specifications (dimensions, voltage, connector type, and BMS protocol) and daily swap volume targets.
Compatibility & Interface Engineering

Our team evaluates mechanical fit, designs customized battery slots, and decodes your BMS communication parameters.
Firmware & Protocol Testing

We configure the cabinet control board to communicate with your battery and validate API endpoints for software integration.
Prototype Validation & Production

Sample units undergo thermal stress testing, charge-cycle validation, and environmental safety verification before mass manufacturing under ISO 9001 quality controls.

Applications

Delivery & Courier Fleets

Eliminate charging downtime for high-mileage last-mile delivery riders.

Shared E-Mobility

Provide designated battery exchange hubs for commercial scooter and e-bike rental networks.

Electric Cargo Tricycles

Support higher-capacity battery packs used in local freight and agricultural transport vehicles.

FAQ

Q: How do I choose between a smaller and larger cabinet?

A: Consider the number of vehicles served, number of batteries available, average daily swaps, peak-hour demand, available installation space and expected fleet expansion. Cabinet capacity should be based on actual operating demand rather than simply selecting the largest available configuration.

Q: What types of vehicles can use a battery swapping cabinet?

A: The cabinet can be configured for electric motorcycles, e-bikes, electric tricycles and other electric vehicles using removable battery packs. Compatibility depends on the battery's dimensions, voltage, connector and charging requirements.

Q: Can you provide OEM/ODM service?

A: Yes. Project-specific customization can cover cabinet configuration, battery compatibility, electrical parameters, branding, mechanical design and software requirements, subject to technical evaluation.

Q: What battery chemistries are supported?

A: Our charging channels can be programmed for Lithium-ion (NMC), Lithium Iron Phosphate (LFP), and other common rechargeable chemistries according to exact manufacturer charging profiles.

Q: Can the cabinet connect directly to our existing management software?

A: Yes. We provide standard MQTT APIs and protocol documentation, allowing your engineering team to integrate cabinet status, charging metrics, and compartment controls into your proprietary SaaS or App.

Q: What is required for outdoor cabinet installation?

A: The installation site requires a stable concrete foundation, an appropriate AC grid power supply matching total station draw, adequate airflow clearance, and 4G network coverage.

Start Your Cabinet Configuration

Submit your battery spec sheet or project requirements to receive a technical compatibility assessment and engineering quote.
Request Battery Compatibility Check
Download Cabinet Specification Sheet (PDF)
Contact Engineering Team

Send Inquiry Now

As one of the leading smart battery charging and swapping cabinet manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please rest assured to wholesale advanced smart battery charging and swapping cabinet from our factory. If you have any enquiry about cooperation, please feel free to email us.

Software As A Service System